How To Update Samsung S6012 Galaxy Music DUOS Firmware Using An Official Firmware

Before You Start:

- Updating your Galaxy Music Duos firmware will wipe all your saved data (the data on phone's memory), So if you want to keep this data please to do backup before starting the update process otherwise you will never be able to get them back.


Tools and Files:

- Samsung S6012 Galaxy Music Duos Official Firmware Package: After you download the wanted one extract it to use it later.
- Odin flasher program: Download and extract this one too.
- USB Drivers: These drivers are needed to let your PC recognize the phone correctly, So after downloading you have to install them and reboot your PC.
- USB Cable: You can use the original USB cable that comes with the phone.

Firmware Update Steps:

- Turn Off your phone and take its battery out.

- Double click on Odin3.exe icon.

- Now look at Odin's window and check the following options:

Auto Reboot, Re-Partition, F.Reset Time

- You should now select the firmware files from the extracted package, The one you already downloaded and extracted.

- At Odin's window you can see these buttons: PIT, Bootloader, PDA, PHONE, CSC use them to select the firmware files.

- Click PIT button to select ivory.pit

- Click Bootloader button to select BOOT_S6012xxxxx_REV04.tar

- Click PDA button to select CODE_S6012xxxxxx_1087791_REV04_user_low_ship.tar

- Click PHONE button to select MODEM_S6012xxxxx_REV04.tar

- Click CSC button to select CSC_Oxx_S6012Oxxxxxx_1087791_REV04_user_low_ship.tar

- Firmware Update process can be done when your phone is into Download Mode, So to put it into that mode follow this:

Put the battery back into your phone then Press Volume Down Key + OK key + Power Key, And after you see the warning message press Volume Up Key to be into Download Mode.

- Use the USB cable to connect your phone to your PC.

- If it is the first time that you connect the phone to your PC then windows will start installing the needed drivers for it, Wait till that is done then move to the next step.

- Look at Odin's window to check that the program can detect the Com port number of your connected phone.

- You should see 0:[COMxx] when xx is a number, So everything is done right till this step.

- If Odin does not detect it then you can try to disconnect and reconnect the phone again.

- At this step you can start the process by clicking on Start button and let Odin do the rest for you.

- Do not interrupt the process by any way ever or you may kill your phone.

- When Odin finishes his job the phone will be rebooted automatically.

- Look at Odin's window and you should see the word PASS! which indicates that the update was done successfully.

- Disconnect your phone and when it is fully on you can do a full reset by this code: *#87976633#

- After you enter the above code your phone will be restarted, So wait for it.

- Now after all the above steps are done you should get your phone's firmware updated, To check the new firmware version just enter this code *#1234# and you will see the version of the firmware that you have just installed on your phone.


Important Notices:

- The Update or Flash operation will not Sim-Unlock your device ( Unlock S6012 Galaxy Music DUOS ).
- Use Stable PC for the update and never use USB Hub to connect the device.
- Fully charge your device's battery before updating it.
- Keep in mind to backup any wanted data from your device before the update.
- If the firmware package contains only one big file then use it in PDA field and no need to check Re.Partition option or use Pit file.

How To Update Samsung T699 Galaxy S Relay 4G Firmware Using Odin And Stock Firmware Package

What To Do Before Starting?

All you have to do is to make a backup of any wanted data, Like SMS, Contacts and so on, Because you will loose them all after updating your phone, And there is no way to get them back, So it is better to start with this step first.


What Tools and Files I Should Get?

- Stock Firmware Package of Samsung T699 Galaxy S Relay 4G.
- Samsung T699 USB Drivers.
- Odin Flasher (T699).
- The Original USB Cable of your phone.

Important Notices:

- Make sure your phone's battery is fully charged, Or at least is has 90% of charging level.
- Use only a stable PC, And never use USB HUB for connecting the phone.
- Never disconnect the phone or the USB cable during the update process, Unless we mention that in the guide steps.
- Never try to flash a firmware package of another model into your Samsung T699, As that may kill your device.

Firmware Update Steps:

- Extract the downloaded T699 firmware package to your hard drive.

- Install the Samsung T699 USB Drivers, And reboot your PC after that.

- Extract Odin flasher to be used later too.

- Connect your Samsung T699 phone to your PC via USB cable (the phone must be on).

- When your PC detects the new device, Install the needed drivers for it, Then reboot the PC.

- Disconnect the USB cable from your phone.

- Turn OFF your Samsung T699 and take its battery out.

- Run Odin program and make sure to check these options only:

Auto Reboot, F.Reset Time

- In this guide we use this firmware package T699UVAMA2 as example, But you can use the one you want.

- Inside the extracted firmware folder you will get this file:

T699UVAMA2_T699TMBAMA2_T699UVAMA2_HOME.tar.md5

- Click on PDA button and select the above file.

- Now put the phone's battery back, But do not turn it on.

- You can update your phone's firmware when it is into download mode, To do so:

Hold Volume Down key + Home key then press Power button until you get the warning message on your phone's screen, Then press Volume Up key to enter the download mode.

- Connect your phone to PC via USB cable, And install any drivers if needed.

- Look at Odin's window to check if your phone is detected by Odin program.

- If all is OK, Then you will notice that Odin detects the COM port number of your phone like this 0:[COMxx] when xx are numbers.

- Click START button to let Odin do his job by installing the firmware package into your Samsung phone.

- After Odin installs the new firmware on your phone it will be auto rebooted, So wait for it.

- When the phone is fully on disconnect the USB cable.

- Look at Odin's window again to check if the process was done correctly, You will see PASS! Word.

- Do full reset using this code: *2767*3855#

- after entering the above code your phone will restarted again, Just wait for it.

- Now you are free to customize your Samsung T699 and use it with the new firmware version.

How To Flash Samsung X160

Download

How To Update Samsung C5212 Firmware

Firmware Update Steps:

1. Run Samsung C5212 Downloader.
2. Check the Two options: MASTER, SLAVE.
3. At MASTER and SLAVE section check the option: BIN + TFS
4. For Master Bin file select: C5212xxxxx_Master.cla
5. For Master TFS file select: C5212xxxxx_Master.tfs
6. For Slave BIN file select: C5212xxxxx_Slave.cla
7. For Slave TFS file select: C5212xxxxx_Slave.tfs
8. Click START button and connect cable to phone with battery and press Power button.
9. After the program detect the phone press DOWNLOAD to start the update.
10. Wait till all is done then turn on the phone and do full reset: *2767*3855#.

How To Update Firmware of Samsung P5100 Galaxy Tab 2 10.1 Using Odin Flasher

Firmware Update Steps:

- After you run Odin flasher check these options: Re.Partition, Auto Reboot, F.Reset Time.

- In case you have complete firmware files then click PIT button and select:

signed_espresso_20120220_xxG.pit

- The Firmware files should be selected like this:

BOOTLOADER: BOOTLOADER_P5100xxxxxx_411893_REV02_user_low_ship.tar.md5

PDA: PLATFORM_P5100xxxxxx_411893_REV02_user_low_ship.tar.md5

PHONE: MODEM_P5100xxxxx_REV_01_CL1133603.tar.md5

CSC: CSC_Oxx_P5100Oxxxxxx_411893_REV02_user_low_ship.tar.md5

- To put your Tablet into Download Mode do this: Press Volume Down + Power Key for 10 Sec, then Press Volume Up Key.

- At this Step you can connect your Tablet to PC by Its Original USB cable.

- In case the PC asks you to install drivers you should do that and then move to next step.

- To make sure that Odin flasher detects your Tablet check if any COM port number is shown on it.

- Now you are Ready to start the Updating by Clicking START button at Odin flasher.

- During the Update Odin will upload all the Firmware files to your Tablet, Then reboot it.

- It is Recommended to do full reset to your Tablet by this Code: *2767*3855#.

- After the Tablet reboots you can set it up the way you like and enjoy the new updates.

How To Update Samsung S5620 Monte Software

Firmware Update Steps:

1. Download Samsung S5620 Monte Software Downloader.
2. Run the Downloader Program and Select ( BRCM2153 ).
3. Put your phone into Download Mode by pressing ( Volume Down + Power button ) at the same time.
4. Now Connect USB cable to phone.
5. In the program window press Port Search Button to check good connection.
6. If you want to flash Boot files then chec: Full Download option and then press Boot button and select Boot files folder.
7. Now you have to select these files : Amss - Rsrc1 - Rsrc2 - FactoryFS each one in its field.
8. Press Download button to start the programming operation.
9. Do not remove phone or cable till the program finish the whole process.
10. After reboot the phone do Full reset by ( *2767*3855# ) and you are done.

How To Update Firmware Of Samsung P1000 Galaxy Tab

1. Run Samsung P1000 Download program.
2. Check these Three Options: Re-Partition + Auto Reboot + F.Reset Time.
3. Select PIT file in its field.
4. Put Device Into Download Mode ( Press Volume Down + Power ).
5. Connect Cable To Phone.
6. Make sure ID:COM box highlighted yellow that the device is connected to the PC.
7. Start Downloading PIT file by clicking Start Button. Then wait for "Pass" to be appear on the screen.
8. Click on Reset button, then unselect Re-Partition box. Then select PDA, PHONE and CSC Files each in his field.
9. Put Device into Download Mode again, then connect to the PC.
10. Start Downloading PDA, PHONE and CSC files by clicking Start Button. Then wait for "Pass" to be appear on the screen.
11. After all is done reboot the phone and Do Full Reset: *2767*3855#.

How To Update Samsung I9000 Galaxy S Firmware

Firmware Update Steps:

1. Run Samsung I9000 Galaxy S Downloader.
2. Check Re-Partition option and then Cleck PIT button to select: s1_odin_20100xxx.pit file.
3. Click PDA button and select : I9000xxxxx-REV03-PDA-low-CL584433.tar.md5
4. Click PHONE button and select: MODEM_I9000xxxxx.tar.md5
5. Click CSC button and select: GT-I9000-CSC-MULTI-Oxxxxx.tar.md5
6. Put the phone into download mode: Press Volume Down + OK + Power Key.
7. Connect USB cable to Phone and PC.
8. Make sure that the program has detects the phone.
9. Press Start button and wait.
10. When all is done the program will show you PASS! word.
11. Turn on the phone and do full reset: *2767*3855#

Galaxy I9001 all tested soulition

all winnertech A13 Firmware abiable here

DOWNLOAD

How To Update Samsung S5830 Galaxy Ace Firmware With Odin

How To Update Samsung S5830 Galaxy Ace Firmware

Firmware Update Steps:

1. Run Odin3 v3.07
2. Click Start button and the update process will start
3. Connect USB cable to your phone and the program must read the Com number it takes.Put your phone 
4. into Download Mode: Press middle Key ( OK key ) + Power + Volume Down
5. Click BOOT button and select: APBOOT_S5830xxxxx_xxx...._user_low_true.tar.md5
6. Click Phone button and select: MODEM_S5830xxxxx_xxx...._REV03.tar.md5
7. Click PDA button and select: CODE_S5830xxxxx_xxx...._REV03_user_low_true.tar.md5
8. Click CSC button and select: CSC_S5830xxxxxx_xxx......_REV03_user_low_true.tar.md5
9. Do not touch or remove anything till the device rebooted and you can see PASS word on the program.

ALL GSM SOULITION HERE

DOWNLOAD

Mobile Phone Repair Guides

DOWNLOAD

ALL NOKIA CHARGER NOT SUPPORTED SOULITION

DOWNLOAD

ALL LEPHONE FLASH FILE HERE

DOWNLOAD

ALL NOKIA FLASH FILE HERE

DOWNLOAD

JAF + PKEY SOLUTION ALL IN ONE exe

DOWNLOAD

VIDIO TUTORIAL MT-BOX SOLUTION ALL IN ONE exe

DOWNLOAD