How To Update Samsung C3752 Duos Firmware Version Using USB Cable

Samsung C3752 Duos Firmware Update Steps:

- Turn your Samsung C3752 off, And take its battery, SIM cards, And MMC card out.

- From the flasher folder run FlashTool_E2.exe

- To Select the Firmware files from its extracted folder click on (...) button,You have to do so  for each file.

- The selecting of firmware files must be in the below order:

- C3752xxxxx_psi.fls
- C3752xxxxx_slb.fls
- C3752xxxxx_BSY.fls
- C3752xxxxx_CDS.fls
- C3752Oxxxxx_CSC.dffs (Or C3752Oxxxxx_dffs.dffs in some versions)

- Now Check these settings:

Custom Order (Must be checked).
Erases Calibration! : Select (Erase whole flash before download).
Baud Rate: 921600
Communication Driver: Infineon USB Driver.

- Now you can click on Next button, And a new window will appear.

- Click on Start USB1 button.

- Now you have to connect your Samsung C3752 to PC using the USB cable.

- There are more than one way to connect your phone, You can try any one of the following:

1- With the phone's battery in, Press (*) key then connect the USB cable to it.

2- Connect the USB cable to phone without battery, After it is detected you can insert the battery.

- After the FlashTool starts the update process you have to wait for some minutes.

- When the operation is done, You will see a Success word, And that means it was done right.

- Disconnect the USB cable from phone.

- With your Samsung C3752 Duos on, Do a full reset by this code *2767*3855#

- Now when your phone restart it will be ready for using with its new firmware.

How To Update Firmware Of Samsung N7000 Galaxy Note

Firmware Update Guide:

- Run Samsung N7000 Galaxy Note Downloader.

- Check these options: Re-Partition, Auto Reboot, and F. Reset Time.

- Now you have to select Pit file and Firmware files too like this:

PIT: Q1_20110914_16GB.pit

PDA: CODE_N7000xxxxx_CL627135_REV02_user_low_ship.tar.md5

PHONE: MODEM_N7000xxxxx_REV_05_CL1067428.tar.md5

CSC: GT-N7000-MULTI-CSC-Oxxxxx.tar.md5

- Put phone into Download Mode: press Volume Down + Home + Power, then press Volume Up.

- Connect USB cable to phone and make sure the program detect it.

- Click Strat button and wait till the program finishes the process.

- After the phone restarted disconnect USB cable.

- Do Full Reset by Code: *2767*3855#

How To Update Firmware Of Samsung S5330 Wave 2 Pro

Firmware Update Steps:

1. Put you phone into Download Mode ( Press Volume DOWN + Camera key and Power Button ).
2. Run Samsung S5330 Wave 2 Pro Downloader.
3. Select BRCM2133
4. In case You want to change Phone Boot too the check Full Download option.
5. Press Boot button and select Boot files folder.
6. Now you have too select these files each one in his field: Apps, Rsrc1, Rsec2, Factory FS, ShpApp, Fota.
7. Press on Port Search button to check good connection with phone.
8. Click on Download button to start updating your phone.
9. Do Not touch or remove cable from the phone till the operation finished.
10. After it done the phone will restart by itself.
11. Do Full reset: *2767*3855# and it is Done.

How To Update Samsung C3050 / C3053 Stratus Firmware

Tools: Samsung C3050 Stratus Downloader - Original USB cable.

Firmwares: Samsung C3050 / C3053 Stratus Original Firmwares

Flashing Steps:

1. Run Samsung C3050 Stratus Downloader.
2. Select: "Options" > "Settings" >"Generic" >"Specify hardware platform".
3. Select Customer T: Stratus (Intel Sibley 512/128, USB).
4. Also check this Option: Erase all Unused Regions.
5. Connect the phone in Download mode:( Press * + END call ) and connect USB cable to phone.
6. Now select the Com Port that the phone takes.
7. From Flash and Verify tab select S3 flash file you want to flash it.
8. From Default Contents tab select CSC file and check: S-record with Contents.
9. Click on Flash button and type YES in the message box then click OK to Start the process.
10. Do not touch or remove the cable till the Program tell you: All is Well.
11. Turn On the phone and do full reset by the code: *2767*3855#.

How To Update Firmware Of Samsung I5800 Galaxy 3

Firmware Update Steps:

1. Run Samsung I5800 Galaxy 3 Downloader.
2. Click OPS button and select: apollo_0531.ops
3. Click BOOT button and select: I5800xxxxx-REV02-Bootloader-low-CL794643.tar.md5
4. Click PHONE button and select: I5800xxxxx_PHONE.tar.md5
5. Click PDA button and select: I5800xxxxx-REV02-PDA-CL794643.tar.md5
6. Click CSC button and select: I5800Oxxxxx-CSC-MULTI-OXX.tar.md5
7. Check these options: Auto Reboot, Protect OPS, Reset Time
8. Put the phone into download mode: Press Volume Down Key + OK Key + Power Key
9. Connect USB cable to phone and PC.
10. Make sure the program detect the COM the phone takes.
11. Press Start button and wait till all is done.
12. Turn On the phone and do full reset by this Code: *2767*3855#.

How To Update Samsung S5570 Galaxy Mini Firmware

Firmware Update Steps:

1. Run Samsung S5570 Galaxy Mini Downloader.
2. Select OPS file: TASS_v1.0.ops
3. Click BOOT button and select: APBOOT_S5570xxxxx_xxx..._user_mid_false.tar.md5
4. Click Phone button and select: MODEM_S5570xxxxx_xxx...._REV02.tar.md5
5. Click PDA button and select: CODE_S5570xxxxx_xxx..._REV02_user_mid_false.tar.md5
6. Click CSC button and select: CSC_S5570xxxxxx_xxx..._REV02_user_mid_false.tar.md5
7. Put your phone into Download Mode: Press middle Key ( Home key ) + Power + Volume Down
8. Connect USB cable to your phone and the program must read the Com number it takes.
9. Click Start button and the update process will start.
10. Do not touch or remove anything till the device rebooted and you can see PASS word on the program.

How To Update Firmware Of Samsung I9010 Galaxy S Giorgio Armani

Firmware Update Steps:

1. Run Samsung I9010 Galaxy S Giorgio Armani Downloader.
2. Check Re-Partition and Phone Bootloader Update options.
3. Select the PIT, PDA, PHONE & CSC files each one in his field.
4. Enter Device into Download Mode: Press Volume Down + Power And connect Cable.
5. Make sure ID:COM box highlighted yellow to know that the handset is connected to the PC.
6. Start Downloading by clicking Start Button.
7. Handset reboots when download completes.
8. Do Full Reset : *2767*3855#.

Samsung I9010 Galaxy S Giorgio Armani Original Firmwares.

How To Update The Firmware Version Of Samsung S6810 Galaxy Fame, And S6810P Galaxy Fame NFC

Files and Programs:

- Original Firmware Package for Samsung S6810 / S6810P.
- Odin Flasher.
- USB Drivers for Samsung Galaxy Fame.

Tools:

- Original USB cable for Samsung Galaxy Fame, Or any suitable one.
- A computer running Windows OS.

Samsung Galaxy Fame Firmware Update Steps:

- After downloading the needed files and programs, Extract any zipped one, And install the USB drivers, Then it is better to restart your computer.

- Check your phone's battery (Must be at least at 90%).

- Turn Off the phone.

- Take out the phone's battery, SIM card, And memory card too.

- Run Odin.exe flasher program.

- Auto Reboot, F.Reset Time options must be checked.

- In case you need to flash *.PIT file too, Then check Re-Partition option.

- Click on PIT button and select: nevisp.pit file (only when Re-Partition is checked).

- Now you are going to select the firmware files from its extracted folder:

Click Bootloader button to select: BOOT_S6810xxxxxx_REV00.tar.md5

Click PDA button to select: CODE_S6810xxxxxx_xxxx_REV00_...tar.md5

Click PHONE button to select: MODEM_S6810xxxxxx_REV00.tar.md5

Click CSC button to select: CSC_Oxx_S6810xxxxxx_xxxx_REV00_...tar.md5

- Put the phone's battery back, But do not turn it on.

- To put the Galaxy Fame into Download Mode you have to:

Press and Hold Volume Down key + Home key, Then press Power key.

- Connect it to the computer via the USB cable, And wait for it to be detected.

- Odin will detect the Com number of your phone, It will look like this 0:[COMxx].

- Click on Start button.

- Odin program will start installing the selected firmware files into your Galaxy Fame.

- You have to wait for some minutes, But don't interrupt the process at all.

- Your phone will be rebooted after the process is done.

- If it was a successful update, You will see PASS! word at Odine's window.

- Disconnect the USB cable from phone.

- When your phone is fully on, You can do a full reset by this code *2767*3855#

Notices:
- When you have one file inside the firmware update package, Then don't check Re-Partition option, And don't select any PIT file. The one file must be selected as PDA file.

How To Update Samsung E900 Firmware

In this Guide you can get the right steps for Flashing Samsung E900.

Tools: Samsung E900 Download Program - USB cable.

Firmwares: Samsung E900 Original Firmwares

Firmware Update Steps:

1. Run Samsung E900 Download Program.
2. Select: "Options" > "Settings" >"Generic" >"Specify hardware platform".
3. Select Customer T: D830/D840/E900 ( USB ).
4. Also check this Option: Erase all Unused Regions.
5. Connect the phone in Download mode:( Press * + END call ) and connect USB cable to phone.
6. Now select the Com Port that the phone takes.
7. From Flash and Verify tab select S3 flash file you want to flash it.
8. From Default Contents tab select CTS file and check: S-record with Contents.
9. Click on Flash button and type YES in the message box then click OK to Start the process.
10. Do not touch or remove the cable till the Program tell you: All is Well.
11. Turn On the phone and do full reset by the code: *2767*3855#.

How To Update Samsung P3100 Galaxy Tab 2 7.0 Firmware

Tools:
- Samsung P3100 Galaxy Tab 2 7.0 Firmware Package.
- Odin Flasher ( P3100 ).
- USB Drivers.

- After your download the wanted tools you have to extract them and install the USB drivers and then reboot your PC.

Firmware Update Steps:

- Run Odin Flasher and Check these: Re-Partition, Auto Reboot, F.Reset Time.

- Now you have to select the suitable PIT file according to your tablet type:

signed_espresso_20120220_16G.pit

Or

signed_espresso_20120220_8G.pit

- Now from the Extracted Firmware Package you have to select the Files like this:

BOOTLOADER: BOOTLOADER_P3100xxxxx_372946_REV04_user_low_ship.tar.md5

PDA: PLATFORM_P3100xxxxx_372946_REV04_user_low_ship.tar.md5

PHONE: MODEM_P3100xxxx_REV_04_CL1128355.tar.md5

CSC: CSC_Oxx_P3100Oxxxxx_396275_REV04_user_low_ship.tar.md5

- Put the Tablet into Download Mode: Press Volume Down key + Power for 10 sec then press Volume Up key to enter Download Mode.

- Connect the Tablet to your PC by USB cable and install needed drivers.

- When the Tablet detected by Odin that mean all drivers is installed correctly.

- Now you can Click Start button and wait till the Tablet rebooted by Odin.

- If you see PASS! word in green on Odin's window that means the process was done with no errors.

- Disconnect your Tablet and Do Full Reset: *2767*3855#.

How To Update Samsung I6210 Firmware

Tools: Samsung I6210 Download Program - USB cable.

Firmware Update Steps:

1. Run Samsung I6210 Download Program.
2. Select MSM6245/MSM6260, and Full Download (check).
3. From the release files, find and select the folder BOOTFILES.
4. Select Modem: amss.bin
5. Select Rsrc1: Rsrc_I6210_xxxx.rc1
6. Select Rsrc2: Rsrc2_I6210_xxxx(low).rc2
7. Select FactoryFS: FactoryFS_I6210_xxxx.ffs
8. Power off the phone, and then press “*” with “END”. You will see the DOWNLOAD screen.
9. Connect the USB cable, and press Port Search. Once you see “Ready…”, press Download
10. After downloading the BOOTFILES, the phone will automatically reboot and continue downloading the remaining files.
11. After downloading, the phone will reboot and auto-rebuild. Once this is done the phone will reboot again.
12. All is Done.

Firmwares: Samsung I6210 Original Firmwares

How To Update Samsung C6712 Star II DUOS Firmware

Firmware Update Guide:

- Run Samsung C6712 Star II Duos Downloader

- Select BRCM2133

- When you need to Update Boot files you have to check Full Download option ( Risky ).

- Click Boot button and select the Boot files folder ( if you checked Full Download )

- Now you have to select Firmwares files in this Guide we select C6712XXKF3 - OXAKF2 as example:

For Apps field: apps_compressed.bin

For Rsrc1 field: Rsrc_C6712_Open_Europe_Common.rc1

For Rsrc2 field: Rsrc2_C6712(Low).rc2

For Factory FS field: FactoryFs_C6712_Open_Europe_Common.ffs

For CSC field: CSC_C6712_Open_Europe_Common_OXAKF2.csc

For SHP APP field: ShpApp.app

- After that you have to put the phone into Download mode: Volume Down + Sim Swap + Power key.

- Connect USB cable to phone and PC and click Port Search to check connection.

- After the program detect the phone you can click Download button to start updating.

- Wait till the phone restart by itself then do full reset: *2767*3855#

Downloads: Samsung C6712 Star II DUOS Original Firmwares.

How To Update Samsung I8530 Galaxy Beam Firmware

Firmware Update Steps:

- Run Odin program and check: Re.Partition, Auto Reboot, F.Reset Time.

- Click PIT button and select: GT-I8530_EUR_XX_xG.pit

- Click PDA button and select: CODE_GT-I8530_I8530xxxxx_xx_REV00_user_SEC_KEY_xxx_xG.tar.md5

- Click CSC button and select: CSC_GT-I8530-CSC-xxxxxx_SEC_KEY_xG.tar.md5

- Put the phone into Download Mode: Volume Down + OK button + Power button.

- Use the Original USB cable to connect your Phone to PC and install drivers if needed.

- When all is OK the Odin will Detect the Com port number of your phone.

- Click Start button and wait the update process to be done.

- PASS! word in green will appear at Odin's window if the update done correctly.

- The phone will rebooted automatically so wait till it fully on and then do full reset by code: *2767*3855#

How To Update Firmware Of Samsung S8530 Wave II

Where To GET:

- Unlock your S8530 Wave III online.

Tools: Samsung S8530 Wave II Download Program - USB cable.

USB Drivers: Samsung S8530 Wave II USB Drivers

Firmwares: Samsung S8530 Wave II Firmwares

Firmware Update Steps:

1. Check your current HW and SW version with the following string: *#4986*2650468#
2. To set download mode on your device, you have to press  Volume DOWN + Camera Key and Power Button.
3. Run S8530 Wave II downloader.
4. Select LSI
5. Tick Boot Change and and Tick Full Download
6. Click Boot and select Boot folder: (named as BOOTFILES)
7. Click AMSS and select : amss.bin
8. Click Apps and select : apps_compressed.bin
9. Click Rsrc1 and select : Rsrc_S8530_Open_Europe_Common.rc1
10. Click Rsrc2 and select : Rsrc2_S8530_Open_Euro_Common (Low/Mid).rc2
11. Click Factory FS and select : FactoryFs_S8530_Open_Europe_Common.ffs
12. Click CSC and select : S8530XXXXX.csc
13. Click SHP APP and select : ShpApp.app
14. Click FOTA and select : bplib_S8530OpEuroCommon.fota
15. After connecting the mobile with PC, Multiloader should find the COM port automatically. If it cannot find COM port please connect USB cable again and press port search.
16. Click Download [You will see the downloading progress bar].
17. After finishing downloading, the mobile will be starting automatically.

How To Update Firmware Of Samsung S7500 Galaxy Ace Plus

The Update Steps:

- After you Download the Above tools you have to Extract them all.
- Install USB Drivers and Reboot your PC.
- Run Odin Flasher and Check these Options: Re-Partition, Auto Reboot, F.Reset Time.
- From the Firmware Package that you extracted select the Files like this:

PIT: Trebon_1103.pit
BOOTLOADER: APBOOT_S7500xxxxx....md5
PDA: CODE_S7500xxxxx....md5
PHONE: MODEM_S7500xxxxx....md5
CSC: GT-S7500-MULTI-CSC-Oxxxxx...md5

- Put the Phone into Download Mode ( Volume Down  + Home + Power ) then Volume Up.
- Connect USB cable to Phone and PC and Install Drivers if needed.
- If All is OK the Odin Flasher will detects the Com number that the phone takes.
- Click Start to Update the phone with the Firmware Files.
- When all is Done the Odin flasher will Write PASS! word in Green.
- After the Phone boots up completely you can do Full Reset: *2767*3855#.


Important Notice: In case the Firmware Package contains one file only the select it as PDA file.

How To Update Samsung GT-I9082 Galaxy Grand DUOS Firmware, Clear And Easy Steps

Samsung I9082 Galaxy Grand DUOS Firmware Update Steps:

- Turn off your phone and take its battery out.

- Double click on Odin3.exe program to run it.

- Check these options:

Re-Partition ( No need to check this option, Unless you want to flash *.pit file. So you can install the firmware without it too. Use it to repartition your phone only).
Auto Reboot
F.Reset Time

- In the following step you will select the firmware files from the package you already downloaded.

- Click on PIT button and select: baffin.pit

- Click on PDA button and select: CODE_I9082xxxxxx...tar.md5

- Click on PHONE button and select: MODEM_I9082xxxxxx...tar.md5

- Click on CSC button and select: CSC_Oxx_I9082Oxxxxxx...tar.md5

- Put the battery back into your phone but do not turn it on.

- Your phone must be into Download Mode:

Hold Volume Down Key + Home Key then press Power Key until you see the warning message on phone's screen, Then press Volume UP Key to enter the Download Mode.

- Use the USB cable to connect your Phone to PC.

- Wait until your PC detects the phone correctly, And installs the needed drivers for it.

- Look at Odin's window, You should see the COM number of your phone like this 0:[COMxx] when xx are numbers.

- In case Odin could not detect the phone, You may need to restart your PC and try again.

- After you make sure that Odin detects your phone, All you have to do is hitting START button.

- Odin will start to install the firmware files on your phone, Wait until your phone being rebooted by Odin.

- When your phone rebooted, Look at at Odin's window to check if the update was done successfully, You should see PASS! Word.

- After your phone is completely on, Do full reset using this code *#87976633#

- You have to wait one more time until the phone reboots, Then you can customize it the way you like to use.

Notices:
- Flashing or Updating your phone will not remove any SIM locks, If you want to unlock your Samsung Galaxy Grand DUOS I9082 Check our Online Unlock Service.

- When you have only one file inside the firmware package, No need to check Re-Partition option or using *.pit file, And select the file as PDA only.

How To Update Firmware Of Samsung S5360 - S5363 Galaxy Y

Firmware Update Steps:

- Run Samsung S5360 Galaxy Y Downloader.

- Check This Options: Re-Partition, Auto Reboot, F.Reset Time ( Re-Partition if you have 3 files ).

- For PIT file select: totoro_0623.pit

- For BOOTLOADER select: DefaultCalDataWithBoot_S5360xxxxx_REV05.tar.md5

- For PDA select: PDA_S5360xxxxx_REV05.tar.md5

- For PHONE select: MODEM_S5360xxxxx_REV05.tar.md5

- For CSC select: GT-S5360-MULTI-CSC-Oxxxxx.tar.md5

- Put the phone into Download Mode: Volume Down + Home + Power Key and connect USB to phone.

- After the Program detect the phone Click Start button and wait.

- When the Update complete the phone will be restarted.

- Do Full reset by this code: *2767*3855#.

How To Update Samsung Tablet: P7310 Galaxy Tab 8.9 Firmware

Before you start the update operation you need to get the wanted Firmware Package and extract it, Then get the Odin flasher and USB drivers.

For the USB drivers you need to extract the downloaded ZIP file and install the drivers.

Now you have everything you need to update your tablet using original USB cable, So follow the next steps one by one to get your tablet updated.

Tablet Firmware Update Steps:

- After you run Odin flasher check these:

Re-Partition, Auto Reboot, F.Reset Time

- From the Firmware folder you have to select the files in this order:

PIT: p5_0614.pit

BOOTLOADER: BOOTLOADER_P7310_SMD_UNIFICATION.tar

PDA: CODE_P7310xxxxx_CL514801_REV00_user_low_ship_xxx.tar.md5

CSC: CSC_P7310xxxxx_CL514801_REV00_user_low_ship_xxx.tar.md5

- In this step you should put your tablet into Download Mode:

Press Volume Down + Power for 10 Sec, then press Volume Up Key.

- Connect USB cable to your tablet and PC and install USB drivers for the tablet if needed.

- Look at Odin's window and make sure that Odin gets the Com port number of your tablet.

- When all the above steps are done correctly you can click START button and let Odin works.

- While Odin is Updating your tablet do not interrupt it at all and wait till the tablet rebooted automatically.

- If the Updating goes well then you will see PASS! word in Green at Odin's window.

- Disconnect your tablet and Do Full Reset using this Code: *2767*3855#.

- Wait till the tablet fully rebooted and then start making the wanted settings to use it the way you like.


Notice: Whenever you have one File only inside the firmware package then you should select it as PDA file and no need for Pit file too.

How To Update Samsung M3710 Corby Beat Firmware

Samsung M3710 Corby Beat Update Steps:

1. Run Samsung M3710 Corby Beat Downloader.
2. Check BRCM2133 option.
3. In case you want to flash Boot files to your phone check Full Download option.
4. Click Boot button and show the program the Boot files folder.
5. Click Apps button and select this file: apps_compressed.bin
6. Click Rsrc1 button and select this file: Rsrc_M3710_Open_Europe_Common.rc1
7. Click Rsrc2 button and select this file: Rsrc2_M3710(Low).rc2
8. Click Factory FS button and select this file: FactoryFs_M3710_Open_Europe_Common.ffs
9. Put the phone into download mode: Press Camera key + Volume Down key + Power key
10. Connect USB cable to phone and click Port Search button.
11. When the program detect the Com number that the phone takes click Download button to start the process.
12. Do not touch the phone or cable till all is done and the phone restart.
13. After reboot the phone you can do full reset by this Code: *2767*3855#.

How To Flash Samsung I5700

Firmware Update:

1. Run Samsung I5700 Galaxy Spica Downloader.
2. Click OPS button and select: Spica.ops
3. Click BOOT button and select: i5700XXxxx_BOOT.tar
4. Click Phone button and select: i5700XXxxx_PHONE.tar
5. Click PDA button and select: i5700XXxxx_PDA.tar
6. Click CSC button and select: i5700XXxxx_CSC.tar
7. Put you phone into Download mode ( Press Volume down Key + OK key ) and connect USB cable.
8. If the Program detect the phone you should see the COM number the phone takes.
9. Make sure these options is enabled : Protect OPS + Auto Reboot.
10. Click Start button to let the process begin.
11. When all is done you can see PASS word on the program.

Notice: In case you have one file package of Firmware then no need to flash OPS file, Just check ( One Package ) option and click One Package button then select the file you have.

Samsung I5700 USB Drivers

Samsung I5700 Spica Original Firmware