- Turn off your phone and take its battery out.
- Double click on Odin3.exe program to run it.
- Check these options:
Re-Partition ( No need to check this option, Unless you want to flash *.pit file. So you can install the firmware without it too. Use it to repartition your phone only).
Auto Reboot
F.Reset Time
- In the following step you will select the firmware files from the package you already downloaded.
Re-Partition ( No need to check this option, Unless you want to flash *.pit file. So you can install the firmware without it too. Use it to repartition your phone only).
Auto Reboot
F.Reset Time
- In the following step you will select the firmware files from the package you already downloaded.
- Click on PIT button and select: baffin.pit
- Click on PDA button and select: CODE_I9082xxxxxx...tar.md5
- Click on PHONE button and select: MODEM_I9082xxxxxx...tar.md5
- Click on CSC button and select: CSC_Oxx_I9082Oxxxxxx...tar.md5
- Put the battery back into your phone but do not turn it on.
- Your phone must be into Download Mode:
Hold Volume Down Key + Home Key then press Power Key until you see the warning message on phone's screen, Then press Volume UP Key to enter the Download Mode.
- Use the USB cable to connect your Phone to PC.
- Your phone must be into Download Mode:
Hold Volume Down Key + Home Key then press Power Key until you see the warning message on phone's screen, Then press Volume UP Key to enter the Download Mode.
- Use the USB cable to connect your Phone to PC.
- Wait until your PC detects the phone correctly, And installs the needed drivers for it.
- Look at Odin's window, You should see the COM number of your phone like this 0:[COMxx] when xx are numbers.
- In case Odin could not detect the phone, You may need to restart your PC and try again.
- After you make sure that Odin detects your phone, All you have to do is hitting START button.
- Odin will start to install the firmware files on your phone, Wait until your phone being rebooted by Odin.
- When your phone rebooted, Look at at Odin's window to check if the update was done successfully, You should see PASS! Word.
- After your phone is completely on, Do full reset using this code *#87976633#
- You have to wait one more time until the phone reboots, Then you can customize it the way you like to use.
Notices:
- Flashing or Updating your phone will not remove any SIM locks, If you want to unlock your Samsung Galaxy Grand DUOS I9082 Check our Online Unlock Service.
- Flashing or Updating your phone will not remove any SIM locks, If you want to unlock your Samsung Galaxy Grand DUOS I9082 Check our Online Unlock Service.
- When you have only one file inside the firmware package, No need to check Re-Partition option or using *.pit file, And select the file as PDA only.
No comments:
Post a Comment