Thursday, 18 April 2013

How To Update Samsung I9105P Galaxy S2 Plus Firmware Using Odin Flasher

Samsung Galaxy S II Plus Firmware Update Steps:

- Turn off your phone and take its battery out.
- Double click on Odin3.exe program to run it.
- Check these options:
  • Re-Partition ( No need to check this option, Unless you want to flash *.pit file. So you can install the firmware without it too. Use it to repartition your phone only).
  • Auto Reboot
  • F.Reset Time

- In the following step you will select the firmware files from the package you already downloaded.
- Click on PIT button and select: s2vip.pit
- Click on Bootloader button and select: DefaultCalDataWithBoot_I9105Pxxxxxx..tar.md5
- Click on PDA button and select: CODE_I9105Pxxxxxx...tar.md5
- Click on PHONE button and select: MODEM_I9105Pxxxxxx...tar.md5
- Click on CSC button and select: CSC_Oxx_I9105POxxxxxx...tar.md5

- Your phone must be into Download Mode:

Hold Volume Down Key + Home Key then press Power Key until you see the warning message on phone's screen, Then press Volume UP Key to enter the Download Mode.

- Use the USB cable to connect your Phone to PC.
- Wait until your PC detects the phone correctly, And installs the needed drivers for it.
- Look at Odin's window, You should see the COM number of your phone like this 0:[COMxx] when xx are numbers.
- In case Odin could not detect the phone, You may need to restart your PC and try again.
- After you make sure that Odin detects your phone, All you have to do is hitting START button.
- Odin will start to install the firmware files on your phone, Wait until your phone being rebooted by Odin.
- When your phone rebooted, Look at at Odin's window to check if the update was done successfully, You should see PASS! Word.
- After your phone is completely on, Do full reset using this code *#87976633#
- You have to wait one more time until the phone reboots, Then you can customize it the way you like to use.

Notices:
- Flashing or Updating your phone will not remove any SIM locks, If you want to unlock your Samsung Galaxy S2 Plus I9105P Check our Online Unlock Service.
- When you have only one file inside the firmware package, No need to check Re-Partition option or using *.pit file, And select the file as PDA only.

No comments:

Post a Comment