How To Update Samsung S6312 Galaxy Young Duos Firmware - Stock Firmware

Samsung S6312 Firmware Update Steps:

- Make sure that your phone's battery has at least 90% of charging level.

- Turn your phone off.

- Take out your phone's battery, SIM Card, And memory card.

- Run Odin.exe program.

- Make sure that Auto Reboot, F.Reset Time options are checked.

- At this step you have to select the firmware files from its extracted folder:

Click PDA button to select CODE_S6312xxxxxx_900805_REV03_user_low_ship.tar.md5

Click PHONE button to select MODEM_S6312xxxxxx_900805_REV03_user_low_ship.tar.md5

Click CSC button to select CSC_Oxx_S6312Oxxxxxx_894543_REV03_user_low_ship.tar.md5

- Put your phone's battery back but don't turn it on.

- To put your phone into Download Mode:

Press and Hold Volume Down key + Home key, Then press Power key until you see the warning message on phone's screen, Now release all keys and press Volume Up key.

- Connect the USB cable to phone and PC.

- Wait for windows for detecting it, And installing any needed drivers.

- When Odin program correctly detects the phone, You will see 0:[COMxx] when xx are numbers.

- To begin the update click on Start button.

- Your phone will be rebooted by Odin program after installing the new firmware files into your phone, And you can see PASS! Word at Odin program.

- Now it is safe to disconnect the USB cable from phone.

- Wait until the phone is fully on, And then do a full reset using this code *2767*3855#

- Once again you should wait for your phone to restart.

- Now your Samsung Galaxy Young Duos is updated and you can enjoy using the new firmware version.


Notice: If the Firmware Package contains only one big file, Then you have to select it as PDA file, And follow all the other steps as they are.