How To Update Firmware of Samsung P5100 Galaxy Tab 2 10.1 Using Odin Flasher

Firmware Update Steps:

- After you run Odin flasher check these options: Re.Partition, Auto Reboot, F.Reset Time.

- In case you have complete firmware files then click PIT button and select:

signed_espresso_20120220_xxG.pit

- The Firmware files should be selected like this:

BOOTLOADER: BOOTLOADER_P5100xxxxxx_411893_REV02_user_low_ship.tar.md5

PDA: PLATFORM_P5100xxxxxx_411893_REV02_user_low_ship.tar.md5

PHONE: MODEM_P5100xxxxx_REV_01_CL1133603.tar.md5

CSC: CSC_Oxx_P5100Oxxxxxx_411893_REV02_user_low_ship.tar.md5

- To put your Tablet into Download Mode do this: Press Volume Down + Power Key for 10 Sec, then Press Volume Up Key.

- At this Step you can connect your Tablet to PC by Its Original USB cable.

- In case the PC asks you to install drivers you should do that and then move to next step.

- To make sure that Odin flasher detects your Tablet check if any COM port number is shown on it.

- Now you are Ready to start the Updating by Clicking START button at Odin flasher.

- During the Update Odin will upload all the Firmware files to your Tablet, Then reboot it.

- It is Recommended to do full reset to your Tablet by this Code: *2767*3855#.

- After the Tablet reboots you can set it up the way you like and enjoy the new updates.