Thursday, 18 April 2013

How To Update Firmware Of Samsung S7500 Galaxy Ace Plus

The Update Steps:
- After you Download the Above tools you have to Extract them all.
- Install USB Drivers and Reboot your PC.
- Run Odin Flasher and Check these Options:
Re-Partition, Auto Reboot, F.Reset Time.
- From the Firmware Package that you extracted select the Files like this:
PIT: Trebon_1103.pit
BOOTLOADER: APBOOT_S7500xxxxx....md5
PDA: CODE_S7500xxxxx....md5
PHONE: MODEM_S7500xxxxx....md5
CSC: GT-S7500-MULTI-CSC-Oxxxxx...md5

- Put the Phone into Download Mode ( Volume Down  + Home + Power ) then Volume Up.
- Connect USB cable to Phone and PC and Install Drivers if needed.
- If All is OK the Odin Flasher will detects the Com number that the phone takes.
- Click Start to Update the phone with the Firmware Files.
- When all is Done the Odin flasher will Write PASS! word in Green.
- After the Phone boots up completely you can do Full Reset: *2767*3855#.


Important Notice: In case the Firmware Package contains one file only the select it as PDA file.

No comments:

Post a Comment