How To Update Samsung E900 Firmware

In this Guide you can get the right steps for Flashing Samsung E900.

Tools: Samsung E900 Download Program - USB cable.

Firmwares: Samsung E900 Original Firmwares

Firmware Update Steps:

1. Run Samsung E900 Download Program.
2. Select: "Options" > "Settings" >"Generic" >"Specify hardware platform".
3. Select Customer T: D830/D840/E900 ( USB ).
4. Also check this Option: Erase all Unused Regions.
5. Connect the phone in Download mode:( Press * + END call ) and connect USB cable to phone.
6. Now select the Com Port that the phone takes.
7. From Flash and Verify tab select S3 flash file you want to flash it.
8. From Default Contents tab select CTS file and check: S-record with Contents.
9. Click on Flash button and type YES in the message box then click OK to Start the process.
10. Do not touch or remove the cable till the Program tell you: All is Well.
11. Turn On the phone and do full reset by the code: *2767*3855#.

How To Update Samsung P3100 Galaxy Tab 2 7.0 Firmware

Tools:
- Samsung P3100 Galaxy Tab 2 7.0 Firmware Package.
- Odin Flasher ( P3100 ).
- USB Drivers.

- After your download the wanted tools you have to extract them and install the USB drivers and then reboot your PC.

Firmware Update Steps:

- Run Odin Flasher and Check these: Re-Partition, Auto Reboot, F.Reset Time.

- Now you have to select the suitable PIT file according to your tablet type:

signed_espresso_20120220_16G.pit

Or

signed_espresso_20120220_8G.pit

- Now from the Extracted Firmware Package you have to select the Files like this:

BOOTLOADER: BOOTLOADER_P3100xxxxx_372946_REV04_user_low_ship.tar.md5

PDA: PLATFORM_P3100xxxxx_372946_REV04_user_low_ship.tar.md5

PHONE: MODEM_P3100xxxx_REV_04_CL1128355.tar.md5

CSC: CSC_Oxx_P3100Oxxxxx_396275_REV04_user_low_ship.tar.md5

- Put the Tablet into Download Mode: Press Volume Down key + Power for 10 sec then press Volume Up key to enter Download Mode.

- Connect the Tablet to your PC by USB cable and install needed drivers.

- When the Tablet detected by Odin that mean all drivers is installed correctly.

- Now you can Click Start button and wait till the Tablet rebooted by Odin.

- If you see PASS! word in green on Odin's window that means the process was done with no errors.

- Disconnect your Tablet and Do Full Reset: *2767*3855#.

How To Update Samsung I6210 Firmware

Tools: Samsung I6210 Download Program - USB cable.

Firmware Update Steps:

1. Run Samsung I6210 Download Program.
2. Select MSM6245/MSM6260, and Full Download (check).
3. From the release files, find and select the folder BOOTFILES.
4. Select Modem: amss.bin
5. Select Rsrc1: Rsrc_I6210_xxxx.rc1
6. Select Rsrc2: Rsrc2_I6210_xxxx(low).rc2
7. Select FactoryFS: FactoryFS_I6210_xxxx.ffs
8. Power off the phone, and then press “*” with “END”. You will see the DOWNLOAD screen.
9. Connect the USB cable, and press Port Search. Once you see “Ready…”, press Download
10. After downloading the BOOTFILES, the phone will automatically reboot and continue downloading the remaining files.
11. After downloading, the phone will reboot and auto-rebuild. Once this is done the phone will reboot again.
12. All is Done.

Firmwares: Samsung I6210 Original Firmwares

How To Update Samsung C6712 Star II DUOS Firmware

Firmware Update Guide:

- Run Samsung C6712 Star II Duos Downloader

- Select BRCM2133

- When you need to Update Boot files you have to check Full Download option ( Risky ).

- Click Boot button and select the Boot files folder ( if you checked Full Download )

- Now you have to select Firmwares files in this Guide we select C6712XXKF3 - OXAKF2 as example:

For Apps field: apps_compressed.bin

For Rsrc1 field: Rsrc_C6712_Open_Europe_Common.rc1

For Rsrc2 field: Rsrc2_C6712(Low).rc2

For Factory FS field: FactoryFs_C6712_Open_Europe_Common.ffs

For CSC field: CSC_C6712_Open_Europe_Common_OXAKF2.csc

For SHP APP field: ShpApp.app

- After that you have to put the phone into Download mode: Volume Down + Sim Swap + Power key.

- Connect USB cable to phone and PC and click Port Search to check connection.

- After the program detect the phone you can click Download button to start updating.

- Wait till the phone restart by itself then do full reset: *2767*3855#

Downloads: Samsung C6712 Star II DUOS Original Firmwares.

How To Update Samsung I8530 Galaxy Beam Firmware

Firmware Update Steps:

- Run Odin program and check: Re.Partition, Auto Reboot, F.Reset Time.

- Click PIT button and select: GT-I8530_EUR_XX_xG.pit

- Click PDA button and select: CODE_GT-I8530_I8530xxxxx_xx_REV00_user_SEC_KEY_xxx_xG.tar.md5

- Click CSC button and select: CSC_GT-I8530-CSC-xxxxxx_SEC_KEY_xG.tar.md5

- Put the phone into Download Mode: Volume Down + OK button + Power button.

- Use the Original USB cable to connect your Phone to PC and install drivers if needed.

- When all is OK the Odin will Detect the Com port number of your phone.

- Click Start button and wait the update process to be done.

- PASS! word in green will appear at Odin's window if the update done correctly.

- The phone will rebooted automatically so wait till it fully on and then do full reset by code: *2767*3855#

How To Update Firmware Of Samsung S8530 Wave II

Where To GET:

- Unlock your S8530 Wave III online.

Tools: Samsung S8530 Wave II Download Program - USB cable.

USB Drivers: Samsung S8530 Wave II USB Drivers

Firmwares: Samsung S8530 Wave II Firmwares

Firmware Update Steps:

1. Check your current HW and SW version with the following string: *#4986*2650468#
2. To set download mode on your device, you have to press  Volume DOWN + Camera Key and Power Button.
3. Run S8530 Wave II downloader.
4. Select LSI
5. Tick Boot Change and and Tick Full Download
6. Click Boot and select Boot folder: (named as BOOTFILES)
7. Click AMSS and select : amss.bin
8. Click Apps and select : apps_compressed.bin
9. Click Rsrc1 and select : Rsrc_S8530_Open_Europe_Common.rc1
10. Click Rsrc2 and select : Rsrc2_S8530_Open_Euro_Common (Low/Mid).rc2
11. Click Factory FS and select : FactoryFs_S8530_Open_Europe_Common.ffs
12. Click CSC and select : S8530XXXXX.csc
13. Click SHP APP and select : ShpApp.app
14. Click FOTA and select : bplib_S8530OpEuroCommon.fota
15. After connecting the mobile with PC, Multiloader should find the COM port automatically. If it cannot find COM port please connect USB cable again and press port search.
16. Click Download [You will see the downloading progress bar].
17. After finishing downloading, the mobile will be starting automatically.

How To Update Firmware Of Samsung S7500 Galaxy Ace Plus

The Update Steps:

- After you Download the Above tools you have to Extract them all.
- Install USB Drivers and Reboot your PC.
- Run Odin Flasher and Check these Options: Re-Partition, Auto Reboot, F.Reset Time.
- From the Firmware Package that you extracted select the Files like this:

PIT: Trebon_1103.pit
BOOTLOADER: APBOOT_S7500xxxxx....md5
PDA: CODE_S7500xxxxx....md5
PHONE: MODEM_S7500xxxxx....md5
CSC: GT-S7500-MULTI-CSC-Oxxxxx...md5

- Put the Phone into Download Mode ( Volume Down  + Home + Power ) then Volume Up.
- Connect USB cable to Phone and PC and Install Drivers if needed.
- If All is OK the Odin Flasher will detects the Com number that the phone takes.
- Click Start to Update the phone with the Firmware Files.
- When all is Done the Odin flasher will Write PASS! word in Green.
- After the Phone boots up completely you can do Full Reset: *2767*3855#.


Important Notice: In case the Firmware Package contains one file only the select it as PDA file.

How To Update Samsung GT-I9082 Galaxy Grand DUOS Firmware, Clear And Easy Steps

Samsung I9082 Galaxy Grand DUOS Firmware Update Steps:

- Turn off your phone and take its battery out.

- Double click on Odin3.exe program to run it.

- Check these options:

Re-Partition ( No need to check this option, Unless you want to flash *.pit file. So you can install the firmware without it too. Use it to repartition your phone only).
Auto Reboot
F.Reset Time

- In the following step you will select the firmware files from the package you already downloaded.

- Click on PIT button and select: baffin.pit

- Click on PDA button and select: CODE_I9082xxxxxx...tar.md5

- Click on PHONE button and select: MODEM_I9082xxxxxx...tar.md5

- Click on CSC button and select: CSC_Oxx_I9082Oxxxxxx...tar.md5

- Put the battery back into your phone but do not turn it on.

- Your phone must be into Download Mode:

Hold Volume Down Key + Home Key then press Power Key until you see the warning message on phone's screen, Then press Volume UP Key to enter the Download Mode.

- Use the USB cable to connect your Phone to PC.

- Wait until your PC detects the phone correctly, And installs the needed drivers for it.

- Look at Odin's window, You should see the COM number of your phone like this 0:[COMxx] when xx are numbers.

- In case Odin could not detect the phone, You may need to restart your PC and try again.

- After you make sure that Odin detects your phone, All you have to do is hitting START button.

- Odin will start to install the firmware files on your phone, Wait until your phone being rebooted by Odin.

- When your phone rebooted, Look at at Odin's window to check if the update was done successfully, You should see PASS! Word.

- After your phone is completely on, Do full reset using this code *#87976633#

- You have to wait one more time until the phone reboots, Then you can customize it the way you like to use.

Notices:
- Flashing or Updating your phone will not remove any SIM locks, If you want to unlock your Samsung Galaxy Grand DUOS I9082 Check our Online Unlock Service.

- When you have only one file inside the firmware package, No need to check Re-Partition option or using *.pit file, And select the file as PDA only.

How To Update Firmware Of Samsung S5360 - S5363 Galaxy Y

Firmware Update Steps:

- Run Samsung S5360 Galaxy Y Downloader.

- Check This Options: Re-Partition, Auto Reboot, F.Reset Time ( Re-Partition if you have 3 files ).

- For PIT file select: totoro_0623.pit

- For BOOTLOADER select: DefaultCalDataWithBoot_S5360xxxxx_REV05.tar.md5

- For PDA select: PDA_S5360xxxxx_REV05.tar.md5

- For PHONE select: MODEM_S5360xxxxx_REV05.tar.md5

- For CSC select: GT-S5360-MULTI-CSC-Oxxxxx.tar.md5

- Put the phone into Download Mode: Volume Down + Home + Power Key and connect USB to phone.

- After the Program detect the phone Click Start button and wait.

- When the Update complete the phone will be restarted.

- Do Full reset by this code: *2767*3855#.

How To Update Samsung Tablet: P7310 Galaxy Tab 8.9 Firmware

Before you start the update operation you need to get the wanted Firmware Package and extract it, Then get the Odin flasher and USB drivers.

For the USB drivers you need to extract the downloaded ZIP file and install the drivers.

Now you have everything you need to update your tablet using original USB cable, So follow the next steps one by one to get your tablet updated.

Tablet Firmware Update Steps:

- After you run Odin flasher check these:

Re-Partition, Auto Reboot, F.Reset Time

- From the Firmware folder you have to select the files in this order:

PIT: p5_0614.pit

BOOTLOADER: BOOTLOADER_P7310_SMD_UNIFICATION.tar

PDA: CODE_P7310xxxxx_CL514801_REV00_user_low_ship_xxx.tar.md5

CSC: CSC_P7310xxxxx_CL514801_REV00_user_low_ship_xxx.tar.md5

- In this step you should put your tablet into Download Mode:

Press Volume Down + Power for 10 Sec, then press Volume Up Key.

- Connect USB cable to your tablet and PC and install USB drivers for the tablet if needed.

- Look at Odin's window and make sure that Odin gets the Com port number of your tablet.

- When all the above steps are done correctly you can click START button and let Odin works.

- While Odin is Updating your tablet do not interrupt it at all and wait till the tablet rebooted automatically.

- If the Updating goes well then you will see PASS! word in Green at Odin's window.

- Disconnect your tablet and Do Full Reset using this Code: *2767*3855#.

- Wait till the tablet fully rebooted and then start making the wanted settings to use it the way you like.


Notice: Whenever you have one File only inside the firmware package then you should select it as PDA file and no need for Pit file too.

How To Update Samsung M3710 Corby Beat Firmware

Samsung M3710 Corby Beat Update Steps:

1. Run Samsung M3710 Corby Beat Downloader.
2. Check BRCM2133 option.
3. In case you want to flash Boot files to your phone check Full Download option.
4. Click Boot button and show the program the Boot files folder.
5. Click Apps button and select this file: apps_compressed.bin
6. Click Rsrc1 button and select this file: Rsrc_M3710_Open_Europe_Common.rc1
7. Click Rsrc2 button and select this file: Rsrc2_M3710(Low).rc2
8. Click Factory FS button and select this file: FactoryFs_M3710_Open_Europe_Common.ffs
9. Put the phone into download mode: Press Camera key + Volume Down key + Power key
10. Connect USB cable to phone and click Port Search button.
11. When the program detect the Com number that the phone takes click Download button to start the process.
12. Do not touch the phone or cable till all is done and the phone restart.
13. After reboot the phone you can do full reset by this Code: *2767*3855#.

How To Flash Samsung I5700

Firmware Update:

1. Run Samsung I5700 Galaxy Spica Downloader.
2. Click OPS button and select: Spica.ops
3. Click BOOT button and select: i5700XXxxx_BOOT.tar
4. Click Phone button and select: i5700XXxxx_PHONE.tar
5. Click PDA button and select: i5700XXxxx_PDA.tar
6. Click CSC button and select: i5700XXxxx_CSC.tar
7. Put you phone into Download mode ( Press Volume down Key + OK key ) and connect USB cable.
8. If the Program detect the phone you should see the COM number the phone takes.
9. Make sure these options is enabled : Protect OPS + Auto Reboot.
10. Click Start button to let the process begin.
11. When all is done you can see PASS word on the program.

Notice: In case you have one file package of Firmware then no need to flash OPS file, Just check ( One Package ) option and click One Package button then select the file you have.

Samsung I5700 USB Drivers

Samsung I5700 Spica Original Firmware

How To Update Samsung S6012 Galaxy Music DUOS Firmware Using An Official Firmware

Before You Start:

- Updating your Galaxy Music Duos firmware will wipe all your saved data (the data on phone's memory), So if you want to keep this data please to do backup before starting the update process otherwise you will never be able to get them back.


Tools and Files:

- Samsung S6012 Galaxy Music Duos Official Firmware Package: After you download the wanted one extract it to use it later.
- Odin flasher program: Download and extract this one too.
- USB Drivers: These drivers are needed to let your PC recognize the phone correctly, So after downloading you have to install them and reboot your PC.
- USB Cable: You can use the original USB cable that comes with the phone.

Firmware Update Steps:

- Turn Off your phone and take its battery out.

- Double click on Odin3.exe icon.

- Now look at Odin's window and check the following options:

Auto Reboot, Re-Partition, F.Reset Time

- You should now select the firmware files from the extracted package, The one you already downloaded and extracted.

- At Odin's window you can see these buttons: PIT, Bootloader, PDA, PHONE, CSC use them to select the firmware files.

- Click PIT button to select ivory.pit

- Click Bootloader button to select BOOT_S6012xxxxx_REV04.tar

- Click PDA button to select CODE_S6012xxxxxx_1087791_REV04_user_low_ship.tar

- Click PHONE button to select MODEM_S6012xxxxx_REV04.tar

- Click CSC button to select CSC_Oxx_S6012Oxxxxxx_1087791_REV04_user_low_ship.tar

- Firmware Update process can be done when your phone is into Download Mode, So to put it into that mode follow this:

Put the battery back into your phone then Press Volume Down Key + OK key + Power Key, And after you see the warning message press Volume Up Key to be into Download Mode.

- Use the USB cable to connect your phone to your PC.

- If it is the first time that you connect the phone to your PC then windows will start installing the needed drivers for it, Wait till that is done then move to the next step.

- Look at Odin's window to check that the program can detect the Com port number of your connected phone.

- You should see 0:[COMxx] when xx is a number, So everything is done right till this step.

- If Odin does not detect it then you can try to disconnect and reconnect the phone again.

- At this step you can start the process by clicking on Start button and let Odin do the rest for you.

- Do not interrupt the process by any way ever or you may kill your phone.

- When Odin finishes his job the phone will be rebooted automatically.

- Look at Odin's window and you should see the word PASS! which indicates that the update was done successfully.

- Disconnect your phone and when it is fully on you can do a full reset by this code: *#87976633#

- After you enter the above code your phone will be restarted, So wait for it.

- Now after all the above steps are done you should get your phone's firmware updated, To check the new firmware version just enter this code *#1234# and you will see the version of the firmware that you have just installed on your phone.


Important Notices:

- The Update or Flash operation will not Sim-Unlock your device ( Unlock S6012 Galaxy Music DUOS ).
- Use Stable PC for the update and never use USB Hub to connect the device.
- Fully charge your device's battery before updating it.
- Keep in mind to backup any wanted data from your device before the update.
- If the firmware package contains only one big file then use it in PDA field and no need to check Re.Partition option or use Pit file.

How To Update Samsung T699 Galaxy S Relay 4G Firmware Using Odin And Stock Firmware Package

What To Do Before Starting?

All you have to do is to make a backup of any wanted data, Like SMS, Contacts and so on, Because you will loose them all after updating your phone, And there is no way to get them back, So it is better to start with this step first.


What Tools and Files I Should Get?

- Stock Firmware Package of Samsung T699 Galaxy S Relay 4G.
- Samsung T699 USB Drivers.
- Odin Flasher (T699).
- The Original USB Cable of your phone.

Important Notices:

- Make sure your phone's battery is fully charged, Or at least is has 90% of charging level.
- Use only a stable PC, And never use USB HUB for connecting the phone.
- Never disconnect the phone or the USB cable during the update process, Unless we mention that in the guide steps.
- Never try to flash a firmware package of another model into your Samsung T699, As that may kill your device.

Firmware Update Steps:

- Extract the downloaded T699 firmware package to your hard drive.

- Install the Samsung T699 USB Drivers, And reboot your PC after that.

- Extract Odin flasher to be used later too.

- Connect your Samsung T699 phone to your PC via USB cable (the phone must be on).

- When your PC detects the new device, Install the needed drivers for it, Then reboot the PC.

- Disconnect the USB cable from your phone.

- Turn OFF your Samsung T699 and take its battery out.

- Run Odin program and make sure to check these options only:

Auto Reboot, F.Reset Time

- In this guide we use this firmware package T699UVAMA2 as example, But you can use the one you want.

- Inside the extracted firmware folder you will get this file:

T699UVAMA2_T699TMBAMA2_T699UVAMA2_HOME.tar.md5

- Click on PDA button and select the above file.

- Now put the phone's battery back, But do not turn it on.

- You can update your phone's firmware when it is into download mode, To do so:

Hold Volume Down key + Home key then press Power button until you get the warning message on your phone's screen, Then press Volume Up key to enter the download mode.

- Connect your phone to PC via USB cable, And install any drivers if needed.

- Look at Odin's window to check if your phone is detected by Odin program.

- If all is OK, Then you will notice that Odin detects the COM port number of your phone like this 0:[COMxx] when xx are numbers.

- Click START button to let Odin do his job by installing the firmware package into your Samsung phone.

- After Odin installs the new firmware on your phone it will be auto rebooted, So wait for it.

- When the phone is fully on disconnect the USB cable.

- Look at Odin's window again to check if the process was done correctly, You will see PASS! Word.

- Do full reset using this code: *2767*3855#

- after entering the above code your phone will restarted again, Just wait for it.

- Now you are free to customize your Samsung T699 and use it with the new firmware version.

How To Flash Samsung X160

Download

How To Update Samsung C5212 Firmware

Firmware Update Steps:

1. Run Samsung C5212 Downloader.
2. Check the Two options: MASTER, SLAVE.
3. At MASTER and SLAVE section check the option: BIN + TFS
4. For Master Bin file select: C5212xxxxx_Master.cla
5. For Master TFS file select: C5212xxxxx_Master.tfs
6. For Slave BIN file select: C5212xxxxx_Slave.cla
7. For Slave TFS file select: C5212xxxxx_Slave.tfs
8. Click START button and connect cable to phone with battery and press Power button.
9. After the program detect the phone press DOWNLOAD to start the update.
10. Wait till all is done then turn on the phone and do full reset: *2767*3855#.

How To Update Firmware of Samsung P5100 Galaxy Tab 2 10.1 Using Odin Flasher

Firmware Update Steps:

- After you run Odin flasher check these options: Re.Partition, Auto Reboot, F.Reset Time.

- In case you have complete firmware files then click PIT button and select:

signed_espresso_20120220_xxG.pit

- The Firmware files should be selected like this:

BOOTLOADER: BOOTLOADER_P5100xxxxxx_411893_REV02_user_low_ship.tar.md5

PDA: PLATFORM_P5100xxxxxx_411893_REV02_user_low_ship.tar.md5

PHONE: MODEM_P5100xxxxx_REV_01_CL1133603.tar.md5

CSC: CSC_Oxx_P5100Oxxxxxx_411893_REV02_user_low_ship.tar.md5

- To put your Tablet into Download Mode do this: Press Volume Down + Power Key for 10 Sec, then Press Volume Up Key.

- At this Step you can connect your Tablet to PC by Its Original USB cable.

- In case the PC asks you to install drivers you should do that and then move to next step.

- To make sure that Odin flasher detects your Tablet check if any COM port number is shown on it.

- Now you are Ready to start the Updating by Clicking START button at Odin flasher.

- During the Update Odin will upload all the Firmware files to your Tablet, Then reboot it.

- It is Recommended to do full reset to your Tablet by this Code: *2767*3855#.

- After the Tablet reboots you can set it up the way you like and enjoy the new updates.

How To Update Samsung S5620 Monte Software

Firmware Update Steps:

1. Download Samsung S5620 Monte Software Downloader.
2. Run the Downloader Program and Select ( BRCM2153 ).
3. Put your phone into Download Mode by pressing ( Volume Down + Power button ) at the same time.
4. Now Connect USB cable to phone.
5. In the program window press Port Search Button to check good connection.
6. If you want to flash Boot files then chec: Full Download option and then press Boot button and select Boot files folder.
7. Now you have to select these files : Amss - Rsrc1 - Rsrc2 - FactoryFS each one in its field.
8. Press Download button to start the programming operation.
9. Do not remove phone or cable till the program finish the whole process.
10. After reboot the phone do Full reset by ( *2767*3855# ) and you are done.

How To Update Firmware Of Samsung P1000 Galaxy Tab

1. Run Samsung P1000 Download program.
2. Check these Three Options: Re-Partition + Auto Reboot + F.Reset Time.
3. Select PIT file in its field.
4. Put Device Into Download Mode ( Press Volume Down + Power ).
5. Connect Cable To Phone.
6. Make sure ID:COM box highlighted yellow that the device is connected to the PC.
7. Start Downloading PIT file by clicking Start Button. Then wait for "Pass" to be appear on the screen.
8. Click on Reset button, then unselect Re-Partition box. Then select PDA, PHONE and CSC Files each in his field.
9. Put Device into Download Mode again, then connect to the PC.
10. Start Downloading PDA, PHONE and CSC files by clicking Start Button. Then wait for "Pass" to be appear on the screen.
11. After all is done reboot the phone and Do Full Reset: *2767*3855#.

How To Update Samsung I9000 Galaxy S Firmware

Firmware Update Steps:

1. Run Samsung I9000 Galaxy S Downloader.
2. Check Re-Partition option and then Cleck PIT button to select: s1_odin_20100xxx.pit file.
3. Click PDA button and select : I9000xxxxx-REV03-PDA-low-CL584433.tar.md5
4. Click PHONE button and select: MODEM_I9000xxxxx.tar.md5
5. Click CSC button and select: GT-I9000-CSC-MULTI-Oxxxxx.tar.md5
6. Put the phone into download mode: Press Volume Down + OK + Power Key.
7. Connect USB cable to Phone and PC.
8. Make sure that the program has detects the phone.
9. Press Start button and wait.
10. When all is done the program will show you PASS! word.
11. Turn on the phone and do full reset: *2767*3855#

Galaxy I9001 all tested soulition

all winnertech A13 Firmware abiable here

DOWNLOAD

How To Update Samsung S5830 Galaxy Ace Firmware With Odin

How To Update Samsung S5830 Galaxy Ace Firmware

Firmware Update Steps:

1. Run Odin3 v3.07
2. Click Start button and the update process will start
3. Connect USB cable to your phone and the program must read the Com number it takes.Put your phone 
4. into Download Mode: Press middle Key ( OK key ) + Power + Volume Down
5. Click BOOT button and select: APBOOT_S5830xxxxx_xxx...._user_low_true.tar.md5
6. Click Phone button and select: MODEM_S5830xxxxx_xxx...._REV03.tar.md5
7. Click PDA button and select: CODE_S5830xxxxx_xxx...._REV03_user_low_true.tar.md5
8. Click CSC button and select: CSC_S5830xxxxxx_xxx......_REV03_user_low_true.tar.md5
9. Do not touch or remove anything till the device rebooted and you can see PASS word on the program.

ALL GSM SOULITION HERE

DOWNLOAD

Mobile Phone Repair Guides

DOWNLOAD

ALL NOKIA CHARGER NOT SUPPORTED SOULITION

DOWNLOAD

ALL LEPHONE FLASH FILE HERE

DOWNLOAD

ALL NOKIA FLASH FILE HERE

DOWNLOAD

JAF + PKEY SOLUTION ALL IN ONE exe

DOWNLOAD

VIDIO TUTORIAL MT-BOX SOLUTION ALL IN ONE exe

DOWNLOAD

Dits Cables Finder NEW

DOWNLOAD

UNIVERSAL BOX VIDEO

DOWNLOAD

UFS repair tool

DOWNLOAD

CYCLONE BOX VIDEO TUTORIAL

DOWNLOAD

jaf repair tool one exe with video

DOWNLOAD

ATF box video tutorial

DOWNLOAD

Nokia New Flasher Fenix Key Video Tutorial One Exe By Naeem

DOWNLOAD

Mx-key New Video Tutorial One Exe By Naeem

DOWNLOAD

Mobile phone disassembly guides

SEE

HARDWARE LIBRARY

DOWNLOAD

nokia mobile factory

SEEsee

PORTABLE TEAM VIWER

DOWNLOAD

MMC RECOVERY SOFTWERE

DOWNLOAD

Tricks_and_codes_of_all_brands_by_Mehmood_Riaz

DOWNLOAD

COMPUTER SOFTWERE MEMORY CARD UNLOCKER

DOWNLOAD

E66 hardwere solution one exe

DOWNLOAD

nokia 2690 hardwere solution one exe

DOWNLOAD

nokia E71 hardwere solution one exe

DOWNLOAD

nokia 6303c hardwere solution one exe

DOWNLOAD

nokia C5 hardwere solution one exe

DOWNLOAD