- Turn your phone off.
- Take out its battery, SIM card, And microSD card too.
- Run Odin.exe program.
- You need to check only these two options: Auto Reboot + F.Reset Time
- Never check Re.Partition option, Unless you have Full firmware package and PIT file.
- Click on PDA button to select the single firmware update file which is located into the extracted firmware folder.
- Put the phone's battery back, But don't turn it on.
- You need to put the phone into Download Mode before connect it to PC:
Press and Hold Volume Down key then press Power key for 10 seconds, After you get the yellow triangle on screen release both keys and press Volume Up key.
- Now connect the phone to the computer using the USB cable.
- Now connect the phone to the computer using the USB cable.
- Wait until Windows detects the new device correctly and installs the drivers for it.
- When Odin detects your connected phone, You will see the COM number of it at Odin's window 0:[COMxx]
- To start the update process click on Start button at Odin's window.
- Installing the new firmware files on your Galaxy Tab 2 10.1 will take few minutes only, So wait for it to be done.
- After Odin does his job, Your phone will be rebooted.
- Unplug the USB cable from your phone.
- Look at Odin's window, If you see PASS! Word then the update was done successfully.
- When your phone is fully on, It is better to do full reset by using this code *2767*3855#
- After the phone restarts you are free to customize it as you like and start enjoying the new firmware version.
No comments:
Post a Comment